PROPERTIES

TEST METHOD

Color

Grey

Visual

Thickness, inches (mm)

0.008” (0.203), 0.010” (0.254)

0.016” (0.406), 0.025” (0.635)

Thickness Tolerance, inches (mm)

± 0.0008” (0.0203), ± 0.0010” (0.0254)

± 0.0016” (0.0406), ± 0.0025” (0.0635)

Construction & Composition

Non-reinforced Film

Specific Gravity, g/cc

2.48

Helium Pycnometer

Phase Change Softening Range, °C

~45°C to 70°C

Thermal Conductivity, W/mK

5.4

Hot Disk Thermal

Constants Analyzer

Hardness (Shore 00)

85

3 sec @ 21 C

ASTM D2240

Thermal Resistance

0.025 (0.004)

ASTM D5470 (modified)

Outgassing TML

0.51%

ASTM E595

Outgassing CVCM

0.20%

ASTM E595

Bond Line Thickness Vs Pressure at 70°C

Pressure (psi)

Phase Change Material

Pressure (psi)

Pressure (psi)

Thermal Resistance Vs Pressure

Pressure (psi)

THR-DS-TPCM-780 0613

Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and

application of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the

fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages

of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request.

© Copyright 2013 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technolo-

gies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party

intellectual property rights. Document A15585-00 Rev C 06/2013