PISA11.CLASS2

PISA11-Series

-25°C to +70°C (-13°F to 158°F)

see Fig. 18-1

Output de-rating

not required

see Fig. 18-1

Storage temperature

-40 to +85°C (-40°F to 185°F)

5 to 95% r.H.

IEC 60068-2-30

2-17.8Hz: ±1.6mm; 17.8-500Hz: 2g

2 hours / axis

IEC 60068-2-6

30g 6ms, 20g 11ms

3 bumps / direction, 18 bumps in total

IEC 60068-2-27

Altitude

0 to 6000m (0 to 20 000ft)

Over-voltage category

III

IEC 62103, EN 50178, altitudes up to 2000m

II

for altitudes from 2000m to 6000m

Degree of pollution

2

IEC 62103, EN 50178, not conductive

LABS compatibility

The unit does not release any silicone or other LABS-critical substances and is suitable for

use in paint shops.

*)

Operational temperature is the same as the ambient temperature and is defined as the air temperature 2cm below the unit.

**) Do not energize while condensation is present.

***) Tested in combination with DIN-Rails according to EN 60715 with a height of 15mm and a thickness of 1.3mm and standard mounting

orientation.

Fig. 18-1 Output current vs. ambient

temperature

Allowed Output Current per Output at 24V

-25

0

20

40

70°C

60

0

1A

2A

3A

4A

3.7A

Ambient Temperature

May 2014 / Rev. 1.7 DS-PISA11.CLASS2 - data sheet -

All parameters are specified at 24Vdc input, 25°C ambient temperature and a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278-0

Germany

15/19