RM024 – RAMP Wireless Module

Datasheet

Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com

www.lairdtech.com/ramp

13

© Copyright 2015 Laird. All Rights Reserved

Americas: +1-800-492-2320

Europe: +44-1628-858-940

Hong Kong: +852 2923 0610

2.1.10 PWM Output

PWM output can be configured to output on any of three pins (SMT Pins 5, 6, or 7). The PWM Output can

optionally produce a pulse width modulation for RSSI with a period of 39.3846 µS.

3.1 Mechanical Drawing

The pluggable versions of the RM024 consist of the surface mount RM024 on a pluggable adapter board.

RM024 –C versions, which only feature an U.FL connector and no integrated antenna, are the same dimensions

as in the mechanical drawings below (Figure 3 and Figure 4) with the stub for the antenna connector removed.

For the surface mount units, this means the module is 32.38 mm long. For the pluggable units, the module is

33.02 mm long.

Note on Mechanical Drawings:



All dimensions are in millimeters



PC board material is 0.79 mm thick FR4



Provide clearance of at least 1.5 mm around the module to be free of other components and features



Module should not exceed 260˚C during reflow soldering