This document is proprietary. Any dispatch or disclosure of content is authorized only after written authorization by PULS GmbH.

All parameters are specified at 400V, 2.5A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

Specification: SP-PAS395 Rev: 3.1

Date: 2013/01/19

13-14

14

Terminals and Wiring

Two self-locking plug-connectors (X1, X2) with spring-clamp connection points

Pin assignment:

X1: Power Connector

X2: Signal Connector

1 Vout (+)

1

Inhibit (+)

2 not used

2

Inhibit (-)

3 Vout (-)

3

Fully charged contact

4 not used

4

Fully charged contact

5 PE

5

Output-OK contact

6 N

6

Output-OK contact

7 L

28 - 12 AWG

Recommended stripping length: 8 - 9mm (0.31 - 0.35in)