Sensor Signal Conditioner for

Ceramic Sensor Applications

ZSSC3138

Datasheet

© 2016 Integrated Device Technology, Inc.

2

January 25, 2016

ZSSC3138 Application Example

Product Sales Code

Description

Package

ZSSC3138BE1

ZSSC3138 die – tested; temperature range -40 to +150°C

Unsawn wafer: add “B” to sales code

Die on frame: add “C” to sales code

ZSSC3138BA1

ZSSC3138 die – tested; temperature range -40 to +125°C

Unsawn wafer: add “B” to sales code

Die on frame: add “C” to sales code

ZSSC3138BE2

ZSSC3138 SSOP14 – temperature range -40 to +150°C

Tube: add “T” to sales code

Tape & Reel: add “R”

ZSSC3138BA2

ZSSC3138 SSOP14 – temperature range -40 to +125°C

Tube: add “T” to sales code

Tape & Reel: add “R”

ZSSC313xKITV1.1

ZSSC313x Evaluation Kit, version 1.1, including Evaluation

Board, ZSSC3138 IC samples, USB cable

Kit

ZSSC313x Mass

Calibration System V1.1

Modular Mass Calibration System (MSC) for ZSSC313x

including MCS boards, cable, connectors

Kit

Corporate Headquarters

6024 Silver Creek Valley Road

San Jose, CA 95138

www.IDT.com

Sales

1-800-345-7015 or 408-284-8200

Fax: 408-284-2775

www.IDT.com/go/sales

Tech Support

www.IDT.com/go/support

DISCLAIMER Integrated Device Technology, Inc. (IDT) reserves the right to modify the products and/or specifications described herein at any time, without notice, at IDT's sole discretion. Performance

specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The

information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any particular purpose, an

implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property

rights of IDT or any third parties.

IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be

reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.

Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the

property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of Integrated

Device Technology, Inc. All rights reserved.

Serial Interface

Sensor Bridge

SDA

SCL

Out / OWI

GND

C3

47nF

+4.5V to +5.5V

2

1

3

4

6

5

7

14

13

11

12

10

VDDA

VSSA

SDA

SCL

n.c.

VDD

VDDE

N.C.

VBR_T

VBP

VBR_B

VBN

AOUT

VSSE

9

8

C2

100nF

C1

100nF

C5

C4