Date

Revision

TITLE

55PC2221

JACKET - RADIATION-CROSSLINKED,

MODIFIED ETFE

CONDUCTOR

SIZE

(AWG)

UPPER SPEC

LIMIT

TARGET

VALUE

DIAMETER

( in.)

WEIGHT

( lbs/1000 ft.)

TARGET

WALL

TARGET

VALUE

LOWER SPEC

LIMIT

UPPER SPEC

LIMIT

.0075

.0075

.0080

.0080

.0080

.0085

.0090

.0095

.096

.108

.126

.144

.159

.190

.228

.276

.0015

.0015

.0015

.0015

.0015

.0015

.0015

.0015

55PC2221-24-*

55PC2221-22-*

55PC2221-20-*

55PC2221-18-*

55PC2221-16-*

55PC2221-14-*

55PC2221-12-*

55PC2221-10-*

24

22

20

18

16

14

12

10

.0060

.0060

.0060

.0060

.0060

.0065

.0070

.0075

.105

.118

.136

.155

.170

.201

.241

.291

.101

.113

.131

.150

.165

.196

.235

.284

SPECIFICATION CONTROL DRAWING

TWO CONDUCTOR CABLE, FLAT BRAID SHIELDED, JACKETED,

GENERAL PURPOSE, 600 VOLT

PART NUMBER

1/

SHIELD COVERAGE: 85% (minimum)

VOLTAGE WITHSTAND TEST (POST ENVIRONMENTAL):

1000 volts (rms), 60 Hz, 1 minute

PART NUMBER:

The "*" in the part numbers above shall be replaced

by a color code designator with a slash separating

the component wire colors and a dash separating

the component wire colors from the jacket color.

1/ Example: AWG 22, red and blue component wires;

white jacket: 55PC2221-22-2/6-9

TEMPERATURE RATING: 150°C

Maximum continous conductor temperature

VOLTAGE RATING: 600 volts (rms) at sea level

DIELECTRIC WITHSTAND: 1500 volts (rms), 60 Hz

CROSSLINK VERIFICATION: 300 ± 3°C for 1 hour

JACKET COLOR: White preferred

JACKET ELONGATION AND TENSILE STRENGTH:

Elongation, 50% (minimum)

Tensil Strength, 5000 lbf/in² (minimum)

JACKET FLAWS:

Spark Test, 1000 volts (rms)

Impulse Dielectric Test, 6.0 kV (peak)

CABLE RATINGS AND ADDITIONAL REQUIREMENTS

SHIELD

STRAND

THICKNESS

(± .0004)

LOWER SPEC

LIMIT

This specification sheet forms a part of the latest issue of Raychem Specification 55PC.

SHIELD - TIN-COATED COPPER

COMPONENT WIRES - 55PC0211

C

JACKET THICKNESS

(in.)

CONSTRUCTION DETAILS

7.49

9.84

13.63

18.85

23.08

33.59

49.25

74.61

8.01

10.48

14.30

19.72

24.07

34.76

50.80

76.79

4-19-06

Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.

501 Oakside Avenue

Redwood City, CA 94063-3800

Phone: 1-800-227-8816

Fax: 1-650-361-6297

Page 1 of 1

THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.

REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.

DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL

1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER,

AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: “901/902...” MAY BE REPLACED BY “Axxx”.) OTHER CODES AND

SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.

Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.

© 2006 Tyco Electronics Corporation. All rights reserved.