CP10.481

CP-Series

Fig. 13-1

Front side

A

Input Terminals (screw terminals)

N, L

Line input

PE (Protective Earth) input

B

Output Terminals (screw terminals)

(two identical + poles and three identical - poles)

+

Positive output

–

Negative (return) output

C

Output voltage potentiometer

Open the flap to adjust the output voltage. Factory set: 48.0V

D DC-OK LED (green)

On, when the output voltage is >90% of the adjusted output voltage

E

DC-OK Relay Contact

(spring-clamp terminals)

Monitors the output voltage of the running power supply. See chapter 8 for details.

Feb. 2016 / Rev. 1.1 DS-CP10.481-EN

All parameters are specified at 48V, 5.4A, 230Vac, 50Hz, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

13/27