ZOPT2201 Datasheet

© 2016 Integrated Device Technology, Inc

44

September 2, 2016

7. Document Revision History

Revision Date

Description

September 2, 2016



Update for UVBS sensitivity.



Addition of ALS/UVBS_Raw Mode as described in sections 3.4, 3.6, and 3.11.1; addition of

ALS/UVBS_Raw Mode current consumption specifications in section 1.3.



Updates for Figure 3.3 and Figure 3.5.



Revision of name for bit 3 in the MAIN_CTRL register from UVBS_Mode to LS_Mode.



Addition of new package type TSV and TSV package information (see new section 4.2).



Addition of reflow profile for LGA6 package.



Update for “Mechanical Dimensions” drawing for LGA6.



Added new section 4.1.4 for tape packaging information.



Minor edits for clarity and formatting.

April 4, 2016

Rebranding for IDT. Revision number is replaced by release date.

March 7, 2016

(Revision 1.00)

First release.

Corporate Headquarters

6024 Silver Creek Valley Road

San Jose, CA 95138

www.IDT.com

Sales

1-800-345-7015 or 408-284-8200

Fax: 408-284-2775

www.IDT.com/go/sales

Tech Support

www.IDT.com/go/support

DISCLAIMER Integrated Device Technology, Inc. (IDT) reserves the right to modify the products and/or specifications described herein at any time, without notice, at IDT's sole d iscretion. Performance

specifications and operating parameters of the described products are determined in an independent state an d are not guaranteed to perform the same way when installed in customer products. The

information contained herein is provided without representation or warranty of any kind, whether express or implied, includin g, but not limited to, the suitability of IDT's products for any particular purpose,

an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey an y license under intellectual

property rights of IDT or any third parties.

IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be

reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, a bsent an express, written agreement by IDT.

Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the

property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of

Integrated Device Technology, Inc. All rights reserved.