Patient Care Unit with Standard Laminate or Optional Terreon® Top

LC700, LC750

Installation Instructions

2

8/16/04

Bradley Corporation • 215-1171 Rev. D; EN 04-1037

Pre-Installation Information

Overview

The Bradley LC700 and LC750 Patient Care Units are all-in-one units containing a water closet and

lavatory. The units come with either a laminate or Terreon® lavatory top and may include an

optional flexible bedpan washer, inline backflow preventer and/or dialysis box.

Check contents

Separate all parts from packaging and make sure all parts are accounted for before discarding any

packaging material. If any parts are missing, do not attempt to install your Bradley Patient Care Unit

until you obtain the missing parts.

NOTE: The LC700 and LC750 Patient Care Units are shipped assembled (except for faucet-mount

option) and secured to a false plywood floor like it will be installed at your location. DO NOT

DISCARD PLYWOOD FLOOR! The plywood floor will serve as your anchor hole location

template.

NOTE: Before beginning installation, all supply, drain and waste piping to your Bradley Patient

Care Unit must be completed according to rough-ins received prior to receiving the unit. If you have

not received rough-ins, contact your Bradley representative.

Supplies required for installation:

• Steel angles and hardware for anchoring the water closet (if concrete is lightweight or less

than 4" thick)

• Hardware for waste outlet connections

• Shims (for water closet or cabinet installation, if necessary)

• Supply piping (including 1/2" NPT flexible hoses) to water closet, faucet or foot valve,

and bedpan washer

• Waste outlet piping to water closet

• P-trap and drain piping

• Silicone caulk