| поискавой системы для электроныых деталей |
|
THS8083APZP датащи(PDF) 47 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
THS8083APZP датащи(HTML) 47 Page - Texas Instruments |
|
47 / 64 page ![]() 5–3 5.4 Electrical Characteristics Over Recommended Operating Free-Air Temperature Range, TA = 0°C to 70°C (unless otherwise noted) NOTE: In order to reach stated performance levels, the device’s PowerPad feature should be thermally and electrically connected to the pcb ground plane, as described in section 6.1 Designing With PowerPad. 5.4.1 Power Supply (3.3 V All Supplies) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT Analog supply ( AVDD CH1 AVDD CH2 3 AVDD PLL AVDD REF) ADC INTREF 325 365 mA Analog supply (=AVDD_CH1+AVDD_CH2_3+AVDD_PLL+AVDD_REF) ADC_INTREF 325 365 mA Digital supply ( DVDD DVDD PLL) ADC INTREF 119 135 mA Digital supply (=DVDD+DVDD_PLL) ADC_INTREF 119 135 mA Total power dissipation normal operation ADC INTREF 147 165 W Total power dissipation normal operation ADC_INTREF 1.47 1.65 W Total power dissipation power down all modes ADC PWDN 385 mW Total power dissipation, power down all modes ADC_PWDN 385 mW 5.4.2 Digital Logic Inputs (HS, VS, SCL, SDA, I2CA, XTL1_MCLK, EXT_ADCCLK, OE, RESET, EXT_CLP) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT IIH High-level input current –10 10 µA IIL Low-level input current DVDD = 3.6 V, Digital inputs and CLK at0Vfor I ; –10 10 µA IIL(CLK) Low-level input current, CLK (see Note 6) Digital inputs and CLK at 0 V for IIL; Digital inputs and CLK at 3.6 V for IIH –14 17 µA IIH(CLK) High-level input current , CLK (see Note 6) Digital in uts and CLK at 3.6 V for IIH –14 17 µA CI Input capacitance 5 pF NOTE 6: Applies when XTL1_MCLK is driven by the clock signal directly. 5.4.3 Logic Outputs (SDA, CHn_OUTA[7..0], CHn_OUTB[7..0], DTOCLK3, ADCCLK2, DATACLK1, DHS, LOCK) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT VOH High-level output voltage DVDD = 3 V at IOH = 50 µA, Digital output forced high 2.9 V VOL Low-level output voltage DVDD = 3.6 V at IOL = 50 µA, Digital output forced low 0.15 V CO Output capacitance 5 pF IOZ(H)/IOZ(L)† High-impedance-state output current DVDD = 3.6 V Worst case for VO = 3.6 V and VO = 0 V –10 10 µA † Tested for CHn-A[7..0] and CHn_B[7..0] only |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |