ONLINE PRODUCT REGISTRATION: Register your MSD product online. Registering your product

will help if there is ever a warranty issue with your product and helps the MSD R&D team create

new products that you ask for! Go to www.msdperformance.com/registration.

MSD Circle Track LS Ignition Control

PN 6014CT

Parts Included:

1 – Ignition Control, PN 6014CT

1 – Main Wiring Harness

1 – Sub Harness

1 – Crank/Cam Pigtail 24x/1x

1 – Crank/Cam Pigtail 58x/4x

1 – USB Cable

1 – Mounting Kit

1 – MSDView USB Flash Drive

WARNING: During installation, disconnect the battery cables. When disconnecting, always re-

move the negative cable first and install it last.

Note: Solid core spark plug wires cannot be used with an MSD Ignition Control.

OPERATION

The MSD 6014CT LS Ignition controller works with 24x/1x, 58x/4x and 58x/1x crank/cam configura-

tions. It auto detects the correct configuration based on the crankshaft reluctor wheel pattern, so

there is no need to select one. It provides a customizable timing plot that can be programmed via

MSDView.

Note: It is recommended, that you install and run MSDView software while connected to the unit to

perform the base settings. The unit can be powered via the USB cable, so this can be done

from a desktop or laptop and does not require an external power source.