Specification for an SMD LC Filter

MtronPTI P/N: LF9248

Rev. -

06/16/10

Page 1 of 2

Proprietary Document Information contained herein is proprietary to MtronPTI and is

submitted in confidence. Information may not be copied or divulged without written

permission from MtronPTI.

I. GENERAL & ELECTRICAL REQUIREMENTS:

2. BANDWIDTH @ 1dB: 400MHz to 475.2MHz

3. INSERTION LOSS (@ peak of transmission): < 2.0dBa

4. REJECTION

@ 1700MHz: 60dBc minimum

@ 2750MHz: 60dBc minimum

II. ENIVIRONMENTAL & PHYSICAL REQUIREMENTS:

1. TEMPERATURE RANGE

Operating: 0

°C to +50°C

Storage: -40

°C to +85°C

3. SOLDERABILITY: Per EIAJ-STD-002 (see Figure 3)

Note 1: Sn10 solder will be utilized throughout the construction and sealing of the LF9248. Therefore, it will support automated

assembly processing. Including; Pick & Place, reflow soldering and post-reflow aqueous and non-aqueous wash.

Note 2: The LF9248 can be supplied on tape & reel but the MOQ for tape & reel is 100-units.

III. DIMENSIONS:

Figure 2: Recommended PAD Layout

Figure 1: Package Outline Drawing