10-2012, Rev. 1012

www.te.com

© 2011 Tyco Electronics Corporation,

a TE Connectivity Ltd. company

Datasheets and product specification

according to IEC 61810-1 and to be used

only together with the ‘Definitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Definitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Definitions’ sec-

tion, application notes and all specifications

are subject to change.

1

SCHRACK

General Purpose Relays

Force Guided Relays

n

2 pole relay with force guided contacts according to EN50205

n

DIN rail mounting

Typical applications

contact monitoring in railway, elevator and machine controls

Approvals

Relay SR2M: VDE, UL, TUV, CQC

Module SR2Z: CE

Technical data of approved types on request

Contact Data

Contact arrangement

2 form C (CO) contacts

According EN50205 only 1NO / 1NC (11-14 and 22-21 or 12-11 and

21-24) shall be used as force guided contacts.

Rated voltage

250VAC

Max. switching voltage

250VAC

Rated current

6A

Contact material

AgNi

Contact style

single contact, force guided

1 form A + B, 1 NO + 1NC

type A according to EN 50205

2 form C, 2CO

type B according to EN 50205

Min. recommended contact load

5V/10mA

Initial contact resistance

≤100mΩ at 1A, 24VDC

≤20Ω at 10mA, 5VDC

Frequency of operation, with/without load

Contact ratings, IEC60947-5-1,

on 1 form A (NO) contact

AC15-3A

DC13-6A

Mechanical endurance

Coil Data

Coil voltage range

24VDC

Operative range, % of rated coil voltage

Release voltage (+23°C)

Limiting voltage, % of rated coil voltage

110%

Max. coil power

700mW

Input circuit

LED

Insulation Data

Initial dielectric strength

between open contacts

between contact and coil

between adjacent contacts

Clearance/creepage

between open contacts

microdisconnection

between contact and coil

≥8/8mm

between adjacent contacts

≥1/1mm

Insulation to EN 50178, type of insulation

between contact and coil

reinforced

between adjacent contacts

basic

Other Data

Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content

refer to the Product Compliance Support Center at

www.te.com/customersupport/rohssupportcenter

Ambient temperature range

for mounting/handling

0 to 40°C

in operation

-25 to 50°C

Terminal type

screwless clamp connectors

Wire cross section

solid wire

stranded wire

stranded wire with bootlace crimp

Mounting position

any

Weight

50g

Packaging unit

2

Force Guided Relay on DIN-rail SR2 Z

F-SR2Z-A