6

Precautionary notes

1.Recommended

Temperature Profile

(Compatible with lead-free

soldering)

[Applicable Conditions]

1. Peak temperature

2. Heating unit: no less than 220

℃ for no more than 60 seconds

3. Preheating unit: 150 to 180

℃ for 90 to 120 seconds

4. Number of times: 2 times max.

＊ Measurement is conducted at the contact lead part

Please check the mounting conditions before use. Conditions such as solder paste

types, manufacturer, PCB size and any other soldering materials may alter the

performance of such materials.

(Note 1) This temperature profile is a recommended value only; please contact your

Hirose Sales Rep for more information

2.Recommended hand

soldering conditions

Temperature of soldering iron: 350±10

3. Recommended screen

thickness, aperture ratio

(pattern surface ratio)

Thickness: 0.1 mm, aperture ratio: 100%

4. Warping of the Board

A maximum of 0.02 mm at the center of connector, as measured from either end of the

connector

5. Cleaning Conditions

IPA cleaning is allowed. (Cleaning is not recommended because cleaning may change

the push/pull feeling etc. Please contact your local Hirose representative prior to the

use of any cleaning agents. )

6. Important Notes

■ When inserting the crimp contact into the crimp socket, do not insert it at a slanted

angle to maintain the reliability of its performance.

■ Please use caution when mating/unmating this connector if it has not been mounted

onto the PCB, doing so could deform or damage the contacts.

■ Do not pull on the wires of this connector as this may cause damage to the

connector.

■ During the hand soldering process, make sure to not apply too much flux. Doing so

may cause a solder wicking problem.

■ This product may experience some differences in color from one production lot to

another. This color difference does not influence the performance of the connector.

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 11/2013. Contents are subject to change without notice for the purpose of improvements.

6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL: +81-45-620-3526 Fax: +81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

®