2

■Product Specifications

Ratings

DF62

Current

Rating

(Note 1)

22 AWG : 4A/pin (2 pos.)

3A/pin (3 - 13 pos.)

2.5A/pin (24 pos.)

24 AWG : 2A/pin

26-30 AWG : 1A/pin

Operating Temperature Range

-35 to 105ç (Note 2)

UL/C-UL -35 to 75

℃（Note 2, 5）

Operating Humidity Range

20

∼ 80% (Note 3)

DF62W

Current

Rating

(Note 1)

20 AWG : 5A (2 pos.), 3.5A/pin (3 to 9 pos)

22 AWG : 4A (2 pos.), 3A/pin (3 to 9 pos)

24 AWG : 3.5A (2 pos.), 2A/pin (3 to 9 pos)

26 AWG : 3A (2 pos.), 1A/pin (3 to 9 pos)

Operating Temperature Range

-40 to 105

℃

（Note 2）

UL/C-UL -40 to 75

℃（Note 2, 5）

Operating Humidity Range

20 to 80

％

（Note 3）

Common

Voltage

Rating

UL File name

UL

：E52653

C-UL : E52653

Storage Temperature Range

-10 to 60ç (Note 4)

UL/C-UL

(Note 5)

AC/DC 29.9V

Storage Humidity Range

40 to 70% (Note 4)

Items

Specifications

Conditions

1. Insulation Resistance

Minimum of 1,000Mø

Measured with DC 500V

2. Withstanding Voltage

No flashover or breakdown

Apply AC 650V for 1 minute

3. Contact

Resistance

Maximum of 30mø

Measured at a maximum of 20mV and 100mA (DC or 1000Hz)

4. Vibration

Resistance

No electrical discontinuity of 1µs or longer

10 cycles in each of three directions at frequency 10-55Hz,

half amplitude 0.75mm

5. Shock

Resistance

No electrical discontinuity of 1µs or longer

Acceleration : 490m/s

direction 3 times each.

6. Humidity

Resistance

Contact Resistance Maximum of 30mø

Insulation Resistance : Minimum of 1,000Mø

Left at temperature 40 ±2ç, humidity 90 to 95%, 96 hours

7. Temperature

Cycles

Contact Resistance : Maximum of 30mø

Insulation Resistance : Minimum of 1,000Mø

-55ç : 30 minutes

→ 5 to 35ç : 2 to 3 minutes → 85ç :

30 minutes

→ 5 to 35ç : 2 to 3 minutes, 5 cycles

8. Durability

Contact Resistance : Maximum of 30mø

Mating/unmating : 30 mating cycles

Note 1 : This is the maximum current rating while all pins are powered or used as all power lines. When isolating power lines into multiple

circuits, current ratings may go above the stated current ratings. Please consult Hirose for specific details before doing this.

Note 2 : Includes the temperature rise of power lines

Note 3 : The connector should be completely dry (no condensation present)

Note 4 : The term “storage” refers to the long-term storage condition of unused products before PCB mounting. The operating

temperature and humidity ranges are applied while in a non-energized state, while in transport or after PCB mounting.

Note 5 : Header type are UL/C-UL pending.

■Materials / Finish

Item

Component

Material

Finish

UL Flammability rating

Socket crimping

contact

Contact

Phosphorous bronze

Gold plating or tin plating

−

Plug crimping

contact

Contact

Phosphorous bronze

Gold plating or tin plating

−

Crimping socket

Insulator

PBT

White

UL94V-0

Crimping plug

Insulator

PBT

Black

UL94V-0

Crimping socket

＊

Seal

Silicone rubber

Bengala

−

Crimping plug

＊

Header

Insulator

DF62

Straight pin header : Polyamide

Black

UL94V-0

Right angle pin header : PBT

DF62W

PBT

Contact

Copper alloy

Gold plating or tin plating

−

Metal fitting

Brass

Tin plating

−

Silicone rubber

Bengala

−

＊Waterproof type (DF62W) only