Socket contacts

Wall

Contact blades

Double row socket

Double row header (SMT)

Double row socket

3.8

8.2

Double row header (SMT)

0.55mm

Contact - header

B297

0.9 mm Pitch Vertical Mating Board-to-Wire Connectors

DF24 Series

Small contact pitch (0.9 mm) together with vertical mating

direction allows high density mounting of the board

components.

Two-level contact location and horizontal wire exits allow a

low profile of 3.8 mm, when fully.

Complete vertical mating, with both sides self-aligned, is

confirmed with tactile “click” sensation.

2-point socket contact, with a long wipe (0.55 mm) assures

highly reliable electrical and mechanical connection.

Despite its low-profile, solder wicking is prevented by the

nickel barrier and solder collection areas.

The walls of the double row socket assembly will self-align

during the mating and protect header and socket

assemblies from a accidental side-pull on the wires.

A pull strap for double row socket version may be selected

for easier un-mating.

Flat contact blades on the headers are supported by the

insulator’s walls, protecting them from deformation during

handling.

Supplied on reels containing 1,000 assemblies.

10. RoHS compliant

All components and materials comply with the requirements

of the EU Directive 2002/95/EC.

Notebook computers, miniature office automation devices,

miniature consumer devices, cameras, recording devices

and other devices requiring vertical mating reliable

connectors.

Space-saving

Low-profile

Long contact wipe

Two-point socket contact

Self-alignment and side-pull protection

Contact deformation protection

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.