MLX92221-AAA

2-Wire Hall Effect Latch

390109224100 Rev. 1

Page 13 of 14

June/13

11.2 SE (TSOT-3L) Package Information

2.75 BSC

1.60 BSC

0.88

+0.02

- 0.03

1.00 MAX

0.075

+0.025

- 0.050

SEATING PLANE

0.575 REF.

0.40

+/-0.10

0.50 BSC

WITH PLATING

~

BASE METAL

SECTION B-

B’

B

B’

Notes:

1. All dimensions are in millimeters

2. Outermost plastic extreme width does not include mold flash or

protrusions. Mold flash and protrusions shall not exceed 0.15mm

per side.

3. Outermost plastic extreme length does not include mold flash or

protrusions. Mold flash and protrusions shall not exceed 0.25mm

per side.

4. The lead width dimension does not include dambar protrusion.

Allowable dambar protrusion shall be 0.07mm total in excess of the

lead width dimension at maximum material condition.

5. Dimension is the length of terminal for soldering to a substrate.

6. Dimension on SECTION B-

B’ applies to the flat section of the lead

between 0.08mm and 0.15mm from the lead tip.

7. Formed lead shall be planar with respect to one another with

0.076mm at seating plane.

see note 2

see note 5

12° REF.

TYP.

0.35

+0.05

- 0.10

0.30

0.45

0.10 R.

MIN.

4°

+/-4

0.10 R.

MIN.

see note 6

SEATING PLANE

TOP VIEW

END VIEW

SIDE VIEW

Hall plate location

Notes:

1. All dimensions are in millimeters

TOP VIEW

END VIEW

Package line

1.51

0.28

SE Pin №

Name

Type

Function

1

VDD

Supply

Supply Voltage pin

2

TEST

I/O

Analog & Digital I/O

3

GND

Ground

Ground pin

Table 1: SE Package pinout

Note: Test pin to be left open or connected to GND in the application