USB2507

DS000002251A-page 30

 2007 - 2016 Microchip Technology Inc.

6.0

XNOR TEST

XNOR continuity tests all signal pins on the Hub (every pin except for NC, XTAL1/CLKIN, XTAL2, ATEST/REG_EN,

RBIAS, TEST1, Power, and Ground). This functionality is enabled by driving TEST1 and CFG_SEL[1] high, driving

SCLK low and transition RESET_N from low to high. The output from the XNOR chain is driven to GR2. For each pin

tested for continuity GR2 should toggle.