MD1730 datasheet(5/34 Pages) MICROCHIP

5 / 34 page

 2016 Microchip Technology Inc.

DS20005586B-page 5

MD1730

1.0

ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings †

Positive Logic Supply (VLL)........................................................................................................................ -0.5V to +3.0V

Positive Supply Voltage (VDD).................................................................................................................... -0.5V to +6.0V

Positive Supply Voltage (VGP).................................................................................................................. -0.5V to +13.5V

Negative Supply Voltage (VGN)................................................................................................................ +0.5V to -13.5V

CW Output Positive Supply Voltage (VCW+) ............................................................................................... -0.5V to +12V

CW Output Negative Supply Voltage (VCW-)............................................................................................... +0.5V to -12V

All Digital Inputs (VIN)................................................................................................................................. -0.5V to +3.0V

CW Outputs (VOUT)...................................................................................................................................... -12V to +12V

Operating Ambient Temperature ................................................................................................................. 0°C to +85°C

Maximum Junction Temperature ................................................................................................................. 0°C to +85°C

Storage Temperature ............................................................................................................................................ +125°C

Thermal Resistance Junction to Ambient (ƟJA, JESD51-5)..................................................................................25°C/W

Thermal Resistance Junction to Bottom Cu Pad (ƟJB, JESD51-5) ....................................................................6.4°C/W

Thermal Resistance Junction to Package Top (ƟJC, JESD51-5).......................................................................13.5°C/W

ESD Rating All Pins ............................................................................................................................................. ±1.0 kV

† Notice:

Stresses above those listed under “Maximum Ratings” may cause permanent damage to the device. This is

a stress rating only and functional operation of the device at those or any other conditions above those indicated in the

operational sections of this specification is not intended. Exposure to maximum rating conditions for extended periods

may affect device reliability.

TABLE 1-1:

INPUT/OUTPUT PIN DC CHARACTERISTICS

Electrical Specifications:

Unless otherwise indicated, VLL = +2.5V, VGP =+10V, VGN =-10V, VCW+ = +6.0V,

VCW- = -6.0V, VDD =+5V, TA =25°C.

Parameters

Sym.

Min.

Typ.

Max.

Units

Conditions

Operating Supply

Logic Supply Voltage

VLL

2.35

2.50

2.65

(VGP+|VCW-|) ≥ 10V

(VGN+|VCW+|) ≥ 10V

TA= 0 to +85°C, Note 2

VDD Supply Voltage

VDD

4.75

5.0

5.25

Positive Supply Voltage

VGP

8.0

Negative Supply Voltage

VGN

-12

-10

-8.0

CW Output Positive Supply

VCW+

1.0

—

6.0

CW Output Negative Supply

VCW-

-6.0

—

-1.0

VLL Quiescent Current

ILLQ

—

0.02

0.1

EN = 0, fCLK =fSCK =0

All logic input no transit

VDD Quiescent Current

IDDQ

—

0.15

0.2

VGP Quiescent Current

IGPQ

—1.0

2.0

µA

VGN Quiescent Current

IGNQ

—33

µA

VCW+ Quiescent Current

ICW+Q

—26

µA

VCW- Quiescent Current

ICW-Q

—6

µA

VLL Enabled Current

ILLEN

—

6.0

9.0

EN = 1, fSCK =120 MHz

TXRW = 0, SDI = 0,

SDO no load.

VDD Enabled Current

IDDEN

—0.2

0.3

VGP Enabled Current

IGPEN

—2.0

3.0

VGN Enabled Current

IGNEN

—2.0

3.0

VCW+ Enabled Current

ICW+EN

—2.0

3.0

VCW- Enabled Current

ICW-EN

—2.0

3.0

Note 1:

Characterized only; not 100% tested in production.

Design Guidance Only (DGO).

MD1730 датащи(PDF) 5 Page - Microchip Technology

MD1730 датащи(HTML) 5 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

датащи скачать

ссылки URL