LP064V1 LIQUID CRYSTAL DISPLAY

SPECIFICATIONS

TITLE: LP064V1 REV. 1 PAGE 16 OF 16

DATA DISPLAY AG

Industriestrasse 1

D-82110 Germering

DEZ 1999

http://www.datadisplay.de

Tel.: +49-89-894450-0

Fax: +49-89-894450-90

Note 2: MONTH

MONTH Jan Feb. Mar. Apr.

May Jun. Jun. Aug. Sep. Oct. Nov. Dec.

Mark

1

2

3

4

5

6

7

8

9

0

N

D

12.4 Location of Lot Mark

Serial NO. is printed on the label. The label is attached to the backside of the

backlight unit. This is subjected to change without prior notice.

12.5 Packing Form

Package quantity in the box: 10

Box size: 370 mm x 260 mm x 400 mm

13.

HANDLING PRECAUTIONS

Please pay attention to the followings when you use this TFT/LCD module with

Back-light unit.

13.1 MOUNTING PRECAUTIONS

• You must mount Module using mounting holes arranged in 4 corners.

• Be sure to turn off the power when connecting or disconnecting the circuit.

• Note that the polarizers are easily damaged. Pay attention not to scratch or press

this surface with any hard object.

• When the LCD surface becomes dirty, please wipe it off with a soft material.

(ie.cottonball). Protect the module from the ESD as it may damage the electronic

circuit (C-MOS). Make certain that treatment person’s body are grounded through

wrist bend.

• Protect the module from the ESD as it may damage the electric circuit (C_MOS).

Make certain that treatment person’s body are grounded through wrist bend.

• Do not disassemble the module and be careful not to incur a mechanical shock

that might occur during installation. It may cause permanent damage.

• Do not leave the module in high temperatures, particularly in areas of high

humidity for a long time.

• The module not be expose to the direct sunlight.

• Avoid contact with water as it may a short circuit within the module.