PM5347 datasheet(93/302 Pages) PMC

93 / 302 page

PM5347 S/UNI-PLUS

DATA SHEET

PMC-941033

ISSUE 6

SATURN USER NETWORK INTERFACE PLUS

PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE

NORMAL MODE REGISTER DESCRIPTION

Normal mode registers are used to configure and monitor the operation of the

S/UNI-PLUS. Normal mode registers (as opposed to test mode registers) are

selected when TRS (A[7]) is low.

Notes on Normal Mode Register Bits:

1. Writing values into unused register bits has no effect. However, to ensure

software compatibility with future, feature-enhanced versions of the product,

unused register bits must be written with logic zero. Reading back unused

bits can produce either a logic one or a logic zero; hence unused register bits

should be masked off by software when read.

2. All configuration bits that can be written into can also be read back. This

allows the processor controlling the S/UNI-PLUS to determine the

programming state of the block.

3. Writable normal mode register bits are cleared to logic zero upon reset unless

otherwise noted.

4. Writing into read-only normal mode register bit locations does not affect

S/UNI-PLUS operation unless otherwise noted.

5. Certain register bits are reserved. These bits are associated with megacell

functions that are unused in this application. To ensure that the S/UNI-PLUS

operates as intended, reserved register bits must only be written with logic

zero. Similarly, writing to reserved registers should be avoided.

PM5347 датащи(PDF) 93 Page - PMC-Sierra, Inc