www.seoulsemicon.com

Product Data Sheet

 “제품 명 – 제품 군” 을 기입하십시오.

제품 군은 홈페이지 응용분야 분류기준을 참고한다.

(예) SZ5M0WWC9 – High-power LED

22

글씨체는 : Arial, 10pt

 Revision numbering 기준:

• 가스펙은 0.0 부터 시작 0.x….

• Final 승인원: 1.0 부터 시작

• 기존에서 일부 수정: +0.1

• 새로운 Data 추가 /또는 기존 것 삭제: +1.0

 수정일자 표기형식; YYYY-MM-DD

(예) 2013-04-01

SPW08F0Z

– P8 Series White

Rev4.1, Sep 2, 2015

Precaution for Use

(1) Storage

To avoid the moisture penetration, we recommend storing P8 Series LEDs in a dry box with a

desiccant . The recommended storage temperature range is 5℃ to 30℃ and a maximum humidity of

RH50%.

(2) Use Precaution after Opening the Packaging

Use proper SMD techniques when the LED is to be soldered dipped as separation of the lens may

affect the light output efficiency.

Pay attention to the following:

a. Recommend conditions after opening the package

- Sealing / Temperature : 5 ~ 40℃ Humidity : less than RH30%

b. If the package has been opened more than 1 year (MSL 2) or the color of

the desiccant changes, components should be dried for 10-12hr at 60±5℃

(3) Do not apply mechanical force or excess vibration during the cooling process to normal

temperature after soldering.

(4) Do not rapidly cool device after soldering.

(5) Components should not be mounted on warped (non coplanar) portion of PCB.

(6) Radioactive exposure is not considered for the products listed here in.

(7) Gallium arsenide is used in some of the products listed in this publication. These products are

dangerous if they are burned or shredded in the process of disposal. It is also dangerous to drink the

liquid or inhale the gas generated by such products when chemically disposed of.

(8) This device should not be used in any type of fluid such as water, oil, organic solvent and etc.

When washing is required, IPA (Isopropyl Alcohol) should be used.

(9) When the LEDs are in operation the maximum current should be decided after measuring the

package temperature.

(10) LEDs must be stored properly to maintain the device. If the LEDs are stored for 3 months or

more after being shipped from Seoul Semiconductor. A sealed container with a nitrogen atmosphere

should be used for storage.

(11) The appearance and specifications of the product may be modified for improvement without

notice.

(12) Long time exposure of sunlight or occasional UV exposure will cause lens discoloration.