ASGTX

Configurable High Performance SMD TCXO/VCTCXO

APPLICATIONS:

FEATURES:

9.0 x 7.0 x 2.24 mm

CERTIFIED

ABRACON IS

CERTIFIED

ABRACON IS

ISO9001:2008

CERTIFIED

• 40G & 100G Ethernet

• WiMax,

• LTE, BTS

• CATV, LAN, LMDS

• Point-to-Point communication networks

ASGTX temperature compensated Crystal Oscillators are designed to accommodate a broad breadth of

Precision TCXO requirements, without NRE and extended lead-times. This oscillator series is designed and

manufactured by Abracon Corporation and is available to order from 1pc to high volume production

between 10MHz & 250MHz

For example, if a reference oscillator requirement calls out 49.7521MHz; ±1.00 ppm TCXO/VCTCXO

with LVCMOS output, ASGTX can be configured and shipped within 1-5 days and in most cases,

same day if order is received before noon. Customers with low-to-mid annual volume requirements

find it difficult to procure custom frequency TCXO/VCTXCO’s without costly NRE charges and/or

long lead-times (> 12 weeks).

output, Any frequency between 10MHz to 1.50GHz

ASGTX is available with either LVDS or LVPECL output, from 10MHz to 1.50GHz; at any desired

frequency, such as 149.875MHz, 1.00GHz, 1.5GHz, etc. with as tight as ±1.00 ppm stability over

temperature. No other solution in the marketplace currently offers such capability, especially in a small

form-factor of 9.0x7.0x2.24 mm.

ASGTX is suitable for a wide variety of precision timing applications where TCXO/VCTXO’s are typically

employed. In addition, for high frequency LO requirements, traditionally customers have relied on SAW

based oscillators. Such devices are only available at a few fixed frequencies, such as 915MHz, 1.0GHz,

etc. They are typically in 9x14mm or bigger packages and vary as much as ±100 ppm over temperature.

Although ASGTX series will be slightly less favorable in phase noise performance compared to SAW based

oscillators, it offers the following key advantages:

o ±1.00 ppm stability over -30ºC to +70ºC & ±2.00 ppm stability over -40ºC to +85ºC

o Small form-factor of 9.0x7.0x2.24 mm

o No NRE or lead-time

• 10MHz to 1.50GHz, any Carrier Frequency in differential mode

(LVDS or LVPECL)

• 10MHz to 250MHz, any Carrier Frequency in LVCMOS mode

• -40ºC to +85ºC operating temperature range

• ±1.0ppm stability over -30ºC to +70ºC and ±2.0ppm stability over

-40ºC to +85ºC

• Minimum guaranteed pull ability of ± 10ppm in VCTCXO mode

• Good Phase Noise, excellent Harmonics and Spurious content

• Guaranteed rms jitter of 1.80ps maximum @ 1.50GHz carrier (LVDS mode)

• Immediate availability, 5-day maximum lead-time for small quantities

OVERVIEW:

ESD Sensitive

2 Faraday, Suit#B, Irvine, California 92618

Revised: 10.16.14

Visit