Entering Pressure Setting Mode

5

Pressure Setting Mode

This mode is used to make Setting 1, Setting 2, hysteresis and digital filter setting.

Setting pressure value

Exiting Pressure Setting Mode

M

Press the   and   buttons simultaneously in Operations Mode.

After switched to Pressure Setting Mode, SW1 should be blinking to indicate the value for Setting 1.

（The values     for 102R and     for 103R have been set in the factory.）

▲

PS30

SW1

kPa

SW2

M

Press the   button.

M

Press the   button.

M

Press the   button.

M

Press the   button.

The SW1 LED should be blinking.

Use the   or   button to select a value for Setting 1（P1）.

（The values     for 102R and     for 103R have been set in the factory.)

（Note 1）The setting can only be made within the allowable display range.

（Note 2）The setting should meet P1≦ P2 − 2H when Window Comparator Mode is selected.

▼

▲

The SW2 LED should be blinking.

Use the   or   button to select a value for Setting 2（P2）.

（The values     for 102R and     for 103R have been set in the factory.）

（Note 1）The setting can only be made within the allowable display range.

（Note 2）The setting should meet P1≦ P2 − 2H when Window Comparator Mode is selected.

▼

▲

The SW1 and SW2 LEDs should be blinking.

Use the   or   button to set the hysteresis (H).

（The values     for 102R and     for 103R have been set in the factory.）

（Note 1）The setting should be 30 digits or less.

（Note 2）The setting should meet P1≦ P2 − 2H when Window Comparator Mode is selected.

▼

▲

Use the   or   button to set the digital filter.

   : No filter,   : 25ms filter,   : 250ms filter

（The value     has been set in the factory.）

▼

▲

Setting 1（P1）

Setting 2（P2）

Hysteresis（H）setting

Digital filter setting

PS30

SW1

kPa

SW2

PS30

SW1

kPa

SW2

PS30

SW1

kPa

SW2

PS30

SW1

kPa

SW2

M

Press the   button more than one second.

The pressure setting will then take effect and you will return to Operations Mode.

PS30

SW1

kPa

SW2