MINT1275

275W Single Output

Medical Series

www.slpower.com

MINT1275 REV 1.6, 22-Jan-14

3

EMI/EMC Compliance

Conducted Emissions

EN55011/22 Class B, FCC Part 15, Subpart B, Class B

Radiated Emissions

EN55011/22 Class A; FCC Part 15, Subpart A, Class A w/6db margin

Static Discharge Immunity

EN61000-4-2, 6kV Contact Discharge, 8kV air discharge

Radiated RF Immunity

EN61000-4-3, 3V/m.

EFT/Burst Immunity

EN61000-4-4, 2kV/5kHz

Line Surge Immunity

EN61000-4-5, 1kV differential, 2kV common-mode

Conducted RF Immunity

EN61000-4-6, 3Vrms

Power Frequency Magnetic Field Immunity

EN61000-4-8, 3A/m

Voltage Dip Immunity

EN61000-4-11, 0% Vin, 0.5cycle; 40% Vin, 5 cycles; 70% Vin, 25 cycles

Line Harmonic Emissions

EN61000-3-2, Class A, B, C, & D

Flicker Test

EN61000-3-3, Complies (dmax<6%)

Mechanical Drawing

Notes:

1. All dimensions in inches (mm), tolerance is +/-0.02”.

2. Mounting holes should be grounded for EMI purposes.

3. FG is safety ground connection.

4. The power supply requires mounting on metal standoffs 0.20” (5mm) in height, min.

Connector Information

Input Connector

Ground

DC Output

Connector

Fan Output

Connector

Signal Connector

PIN 1) AC LINE

PIN 2) EMPTY

PIN 3) AC NEUTRAL

0.250” FASTON TAB

Term. 1: +Vout

Term. 2: -Vout

PIN 1) +12Vfan RTN

PIN 2) +12V fan

PIN 1) Remote Sense (+)

Pin 6) Common

PIN 2) Common

Pin 7) Power Good

PIN 3) Remote Sense (-)

Pin 8) +5Vsb

PIN 4) Current Share

Pin 9) DC OK

PIN 5) Inhibit

Pin 10) +5Vsb RTN

Mating Connector:

Molex 09-50-3031

Pins= 08-52-0072

Mating Connector:

Molex 01-90020001

Mating Connector:

Molex 19141-

0058/0063/0083

Mating Connector:

Molex 22-01-3027

Pins: 08-50-0114

Mating Connector:

Molex 90142-0010

Pins: 90119-2109 or 2120