COMPONENTS PRODUCT INFORMATION

CONNECTOR

NEW

1/12

MB-0192-1

October 2008

JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd.

Features

DP1 Series

General Specifications

No. of Contacts: 20 pos.

Contact Resistance:

Contact area --- 50m ohm max.

Shell area

--- 30m ohm max.

Dielectric Withstanding Voltage :

AC 500V rms per minute

Receptacle is available in reverse SMT type for reverse mounting, angle SMT with

flange, standard angle SMT(mating height 6.5mm, thickest area 6.65mm), and angle

through-hole types (soldered terminal area 1.9mm, applicable board thickness t1.6).

Reinforced-type receptacle available with enhanced metal shell structure, robust

against rough handling of cable during mating and unmating (DP1RD20JQ4).

Excellent transmission with three-row footprint for through-hole type receptacle.

Plugs are available as part of cables in 12.2mm height with latch (mechanical lock) for

increased retention, and 10mm height slim type without latch.

Cable assembly passed compliance test certification by VESA. (2m, 32 AWG)

Nickel and tin plating available for receptacle shell. With 0.3um min. gold plating for

contact.

The DP1 Series is a high speed differential transmission board-to-cable connector

compatible with the Display Port v1.1a, the VESA standardized next-generation digital

display interface.

*VESA (Video Electronics Standard Association)

RoHS Compliant

Applicable Markets

Desktop PC, notebook PC, LCD monitor, graphic board, LCD projector,

LCD television, PDP, etc.

Rated Current: 0.5A per contact

Insulation Resistance: 100M ohm min.

(after test)

Mating Cycles: 10,000 times

Operating Temperature:

-20 Deg. C to +85 Deg. C