MEMS Oscillator, Ultra Performance, LVCMOS/HCMOS Compatible, 1.00 MHz to 80.00 MHz

IM810 Series

ILSI America Phone 775-851-8880 ● Fax 775-851-8882 ●email: e-mail@ilsiamerica.com ●

www.ilsiamerica.com

Specifications subject to change without notice

Rev 01/30/16_A

Page 1 of 8

Features:



MEMS Technology



Direct pin to pin drop-in replacement for industry-standard packages



Ultra-low phase jitter: 0.5 pSec (12 kHz to 20 MHz)



LVCMOS/HCMOS Compatible Output



Industry-standard package 2.5 x 2.0, 3.2 x 2.5, and 5.0 x 3.2 mm x mm



Pb-free, RoHS and REACH compliant



Fast delivery times

Typical Applications:



Fibre Channel



Server and Storage



GPON, EPON



100M / 1G /10G Ethernet

Electrical Specifications:

Frequency Range

1.000 MHz to 80.000MHz

Frequency Stability

See Part Number Guide

Inclusive of Initial Tolerance, Operating Temperature Range, Load, and Voltage.

First Year Aging

±1.5 ppm

At + 25ºC ±2ºC

10 Years Aging

±5.0 ppm

At + 25ºC ±2ºC

Operating Temperature

See Part Number Guide

Supply Voltage (Vdd) ±10%

See Part Number Guide

Current Consumption

31 mA typ./ 33 mA max

29 mA typ./ 31mA max

No load condition, F = 20 MHz, Vdd = +2.5 V, +2.8 V or +3.3 V

No load condition, f = 20 MHz, Vdd = +1.8V

OE Disable Current

31 mA max

30 mA max

Vdd = +2.5 V, +2.8 V or 3.3 V, OE = GND

Vdd = +1.8 V, OE = GND

Standby Current

70 µA max

10 µA max

Vdd = +2.5 V, +2.8 V or 3.3 V,

ST = GND

Vdd = +1.8 V,

ST = GND

Waveform Output

LVCMOS/HCMOS

Symmetry

45%/55%

50% of waveform

Rise / Fall Time

1.2 nSec typ./ 2.0 nSec max

15 pF Load, 10% to 90% of Vdd

Logic “1”

90% of Vdd min

Logic “0”

10% of Vdd max

Input Voltage High

70% of Vdd min

Pin 1, OE or

ST

Input Voltage Low

30% of Vdd max

Pin 1, OE or

ST

Input Pull-up Impedance

100 kΩ typ./ 250 kΩ max

2.0 MΩ min

Pin 1, OE logic high or logic low, or

ST logic high

Pin 1,

ST logic low

Startup Time

7 mSec typ./ 10 mSec max

Measured from the time Vdd reaches its rated minimum values

OE Enable/Disable Time

150 nSec max

F = 80 MHz, For other frequencies, T_oe = 100 nSec = 3 cycles

Resume Time

6 mSec typ./ 10 mSec max

In standby mode, measured from the time

ST pin crosses 50% threshold.

RMS Period Time

1.5 pSec typ./ 2.0 pSec max

2.0 pSec typ./ 3.0 pSec max

F = 75 MHz, all Vdds

RMS Period Time (random)

0.5 pSec typ./ 1.0 pSec max

F = 10 MHz, Integration bandwidth = 12 kHz to 20 MHz

Notes:



All min and max limits are specified over temperature and rated operating voltage with 15pF output unless otherwise stated.



Typical values are at +25ºC and nominal supply voltage.

Absolute Maximum Limits

Storage Temperature

-65ºC to +150ºC

Supply Voltage (Vdd)

-0.5 VDC to 4.0 VDC

Electrostatic Discharge

2000 V max

Solder Temperature (follow standard Pb free soldering guidelines)

260ºC max

Junction Temperature

150ºC max