MM7150

DS00001888B-page 16

 2015 - 2016 Microchip Technology Inc.

8.0

ELECTRICAL CHARACTERISTICS

This section provides an overview of the MM7150 electrical characteristics. Additional information will be provided in

future revisions of this document as it becomes available.

Absolute maximum ratings for the MM7150 devices are listed below. Exposure to these maximum rating conditions for

extended periods may affect device reliability. Functional operation of the device at these or any other conditions, above

the parameters indicated in the operation listings of this specification, is not implied.

Absolute Maximum Ratings

(See Note 1)

Ambient temperature under bias (Commercial temperature range).............................................................0°C to +70°C

Ambient temperature under bias (Industrial temperature range) ..............................................................-40°C to +85°C

Storage temperature .............................................................................................................................. -65°C to +150°C

 2.3V (Note 3) ........................................ -0.3V to +5.5V

Maximum output current sunk by any I/O pin..........................................................................................................15 mA

Maximum output current sourced by any I/O pin.....................................................................................................15 mA

Maximum current sunk by all ports........................................................................................................................200 mA

Maximum current sourced by all ports (Note 2) ....................................................................................................200 mA

Note 1:

Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions,

above those indicated in the operation listings of this specification, is not implied. Exposure to maximum

rating conditions for extended periods may affect device reliability.

2:

Maximum allowable current is a function of device maximum power dissipation (see Table 8-2).

3:

See the “Pin List” section for the 5V tolerant pins.