Note 1: “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is

functional, but do not guarantee specific performance limits.

Note 2: Unless otherwise specified the absolute maximum negative input voltage is equal to the negative power supply voltage.

Note 3: Any of the amplifier outputs can be shorted to ground indefinitely, however, more than one should not be simultaneously shorted as the maximum junction

temperature will be exceeded.

Note 4: The value given is in 400 linear feet/min air flow.

Note 5: The value given is in static air.

Note 6: These devices are available in both the commercial temperature range 0˚C

perature range is designated by the position just before the package type in the device number. A “C” indicates the commercial temperature range and an “M” indi-

cates the military temperature range. The military temperature range is available in “H” package only.

duction test time, the input bias currents measured are correlated to junction temperature. In normal operation the junction temperature rises above the ambient tem-

if input bias current is to be kept to a minimum.

Note 9: Supply voltage rejection ratio is measured for both supply magnitudes increasing or decreasing simultaneously in accordance with common practice from

Note 10: Refer to RETS442X for LF442MH military specifications.

Typical Performance Characteristics

Input Bias Current

DS009155-17

Input Bias Current

DS009155-18

Supply Current

DS009155-19

Positive Common-Mode

Input Voltage Limit

DS009155-20

Negative Common-Mode

Input Voltage Limit

DS009155-21

Positive Current Limit

DS009155-22

www.national.com

3