DS96F173MESLASH883 datasheet(3/10 Pages) NSC

3 / 10 page

Switching Characteristics (Continued)

CC = 5.0V, TA = 25˚C

Symbol

Parameter

Conditions

Min

Typ

Max

Units

Output Disable Time from Low Level

L = 5.0 pF, Figure 3

PLH–tPHL|

Pulse Width Distortion (SKEW)

Figure 1

1.0

3.0

Note 2: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices

should be operated at these limits. The tables of “Electrical Characteristics” provide conditions for actual device operation.

Note 3: Unless otherwise specified min/max limits apply across the 0˚C to +70˚C range for the DS96F173C/DS96F175C. All typicals are given for VCC = 5V and TA

= 25˚C.

Note 4: All currents into the device pins are positive; all currents out of the device pins are negative. All voltages are reference to ground unless otherwise specified.

Note 5: The algebraic convention, when the less positive (more negative) limit is designated minimum, is used in this data sheet for common mode input voltage

and threshold voltage levels only.

Note 6: Hysteresis is the difference between the positive-going input threshold voltage. VTH, and the negative going input threshold voltage, VTL.

Note 7: Refer to EIA-485 Standard for exact conditions.

Note 8: Only one output at a time should be shorted.

Order Number: DS96F173CJ

DS96F175CJ

See NS Package Number J16A

DS96F173ME/883 датащи(PDF) 3 Page - National Semiconductor (TI)

DS96F173ME/883 датащи(HTML) 3 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10

датащи скачать

ссылки URL