Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS

●

Super low ESR, high ripple current capability

●

Downsized from PSC series (

φ8×8L toφ6.3×8L)

●

●

ESR after endurance is specified within the initial spec

●

●

RoHS Compliant

●

Halogen Free

◆SPECIFICATIONS

(at 20

℃, 120Hz)

(at 105

℃)

(at 20

℃ after 2 minutes)

(at 20

℃, 120Hz)

(at 100kHz)

Category

Temperature Range

Rated Voltage Range

Capacitance Tolerance

Surge Voltage

Leakage Current

*Note

Dissipation Factor

Low Temperature

Characteristics

(Max.Impedance Ratio)

Endurance

Bias Humidity Test

Surge Voltage Test

Failure Rate

Items

-55 to +105

℃

±20% (M)

Rated voltage(V)

×1.15

I=0.2CV or 500

µA, whichever is greater

Where, I : Max. leakage current (

µA), C : Nominal capacitance (µF), V : Rated voltage (V)

0.10 max.

Z(-25

℃)/Z(+20℃)≦1.15

Z(-55

℃)/Z(+20℃)≦1.25

The following specifications shall be satisfied when the capacitors are restored to 20

℃ after the rated voltage is applied for 5,000 hours

at 105

℃.

Appearance

No significant damage

Capacitance change

≦±20% of the initial value

≦The initial specified value

ESR

≦The initial specified value

Leakage current

≦The initial specified value

The following specifications shall be satisfied when the capacitors are restored to 20

℃ after subjecting them to DC voltage at 60C,

90 to 95% RH for 1,000 hours.

Appearance

No significant damage

Capacitance change

≦±20% of the initial value

≦The initial specified value

ESR

≦The initial specified value

Leakage current

≦The initial specified value

The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105

℃ for 30 seconds

through a protective resistor(R=1k

Ω) and discharge for 5 minutes 30 seconds.

Appearance

No significant damage

Capacitance change

≦±20% of the initial value

≦The initial specified value

ESR

≦The initial specified value

Leakage current

≦The initial specified value

0.5% per 1,000 hours maximum (Confidence level 60% at 105

℃)

Characteristics

◆DIMENSIONS [mm]

◆MARKING

*Note : If any doubt arises, measure the leakage current after the following voltage treatment.

Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105

℃.

Size code

φD

φd

F

φD'

L'

F08

6.3

2.5

0.6

φD+0.5max.

L+1.5max.

H06

8.0

3.5

Coated Case

L'

15min.

4min.

Coated Case

L'

15min.

4min.

F08

H06

820

EX) 2.5V820

MF

●

Terminal Code : E

Longer life

Downsized

PSE

PSC

Radial Lead

CAT. No. E1001L

(1/2)