DC-DC Brick

POL10/16 SERIES

10/16 A

http://www.archcorp.com.tw

TEL: +886-2-26989508

FAX: +886-2-26981319

-2-

NOTE

DERATING

1. During the test of input reflected ripple current, the input terminal must be connected to a 12 uH inductor and a 220 uF electrolytic capacitor.

2. Point A, which is for testing the output voltage ripple, is 25 mm (0.98 in.) away from the Vout pin.

3. The test platform is a 1oz four-layer board with the dimensions (L x W) being 100 mm x 50 mm (3.94 in. x 1.97 in.).