The TE100-DM24 dual speed SNMP stackable master hub provides a

phenomenal level of flexibility and ease of use for migration to higher

bandwidth network environments. Each port auto-senses between

10Mbps Ethernet and 100Mbps Fast Ethernet. Once the port speed is

determined, the hub creates independent segments for the 10Mbps and

100Mbps ports. Linking the 10Mbps and 100Mbps segments together is

achieved through an optional switch module.

The optional TE100-DSM switch module can be installed in any hub in the

stack, making it possible to transparently bridge between 10Mbps and 100Mbps segments. In a managed hub stack, more than

one TE100-DSM module can be used to provide automatic redundancy.

The TE100-DM24 is a SNMP Master hub which will control up to four TE100-DS24 stackable hubs via integrated management

ports. A stack of TE100-DM24/DS24 hubs operates as a class II Fast Ethernet repeater, allowing linkage to another Class II Fast

Ethernet Stack in the same collision domain.

One 100Base-TX switched port module and one switched 100Base-FX port are also available, in addition to the TE100-DSM

switch module, for greater configuration flexibility.

TE100-DM24

24-port 10/100Mbps Dual Speed SNMP Stackable Master Hub

Plug and Play installation with automatic port configuration

Supports 24 10/100Mbps auto-sensing and auto-negotiation

ports

Uplink port provides easy expansion to another hub

Stackable to five units for a total of 120 ports

Scalable expansion of up to two stacks for a total 238 ports

One management hub) controls an entire stack of dual speed

hubs (max. four hubs)

TE100-DM24 stacks can make use of additional switch

modules for redundancy

EIA-19" rack mountable

High visibility LED indicators provide status for each port

Bandwidth utilization LED array for traffic volume display

Automatic Hub ID assignment and front panel display

Built-in auto-partitioning instantly isolates network failures

One RS-232 port allows local terminal access to hub

configuration, diagnosis, and firmware upgrade

Slide-in switch module allows bridging between 10Mbps and

100Mbps segments, just one switch module is required for

entire stack

Slide-in switch module for one 100Base-TX connections or one

100Base-FX connection

5 Year Warranty

FEATURES

BENEFITS

Upgradable:

Expandable:

Flexible:

Cost Effective:

Performance:

Ethernet workgroups can be upgraded

to Fast Ethernet without changing

hubs.

Connect up to 120 users per stack.

Also stackable with TE100-D16s hubs.

All 10 and 100Mbps users can exist

on one hub.

Provides 10Mbps and 100Mbps

SNMP stackable hub, and

10/100Mbps switch functionality in

one unit.

Full 100Mbps connectivity significantly

boosts network performance.

TE100-DM24 (11-17-2002)

TRENDnet

TRENDware, USA

What's Next in Networking