SS3613

CMOS Omnipolar High Sensitivity Micropower Hall Switch

6

V3.10

Nov 1, 2013

Installation Comments

Consider temperature coefficients of Hall IC and magnetics , as well as air gap and life time variations. Observe

temperature limits during wave soldering. Typical IR solder-reflow profile:

−

No Rapid Heating and Cooling.

−

Recommended Preheating for max. 2minutes at 150

°C

−

Recommended Reflowing for max. 5seconds at 240

°C

ESD Precautions

Electronic semiconductor products are sensitive to Electro Static Discharge (ESD). Always observe Electro

Static Discharge control procedures whenever handling semiconductor products.