| поискавой системы для электроныых деталей |
|
LM3559 датащи(PDF) 34 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
LM3559 датащи(HTML) 34 Page - Texas Instruments |
|
34 / 50 page ![]() 34 LM3559 SNVS624B – JUNE 2011 – REVISED JUNE 2016 www.ti.com Product Folder Links: LM3559 Submit Documentation Feedback Copyright © 2011–2016, Texas Instruments Incorporated Table 14. Privacy Register Bit 7 (Blink 2) Bit 6 (Blink 1) Bit 5 (LED2 Privacy) Bit 4 (LED1 Privacy) Bit 3 (Privacy Terminate) Bit 2 (PD2) Bit 1 (PD1) Bit 0 (PD0) 00 = No blinking 01 = 128 ms blink period (default) 10 = 256 ms blink period 11 = 512 ms blink period 0 = LED2 is off for privacy mode (default) 1 = LED2 is on for privacy mode 0 = LED1 is off for privacy mode 1 = LED1 is on for privacy mode (default) 0 = Privacy mode turns back on at the end of the flash pulse 1 = Privacy mode turns off at the end of the flash pulse (default) Privacy mode current levels (% of minimum torch current) 000 = 10% (default) 001 = 20% 010 = 30% 011 = 40% 100 = 50% 101 = 60% 110 = 70% 111 = 80% 8.6.14 Privacy PWM Period Register The Privacy PWM Register contains the bits to control the PWM period for the privacy indicate mode (see Table 15). Table 15. Privacy PWM Period Register Bits 7-3 (Not Used) Bit 2 (P3) Bit 1 (P2) Bit 0 (P1) 000 = 5.12 ms 001 = 2.56 ms 010 = 1.28 ms 011 = 640 µs 1XX = 320 µs 8.6.15 Indicator Register The Message Indicator Register contain the bits which control the following: 1. Indicator current level 2. Pulse width 3. Ramp times for turnon and turnoff of the indicator current source (see Figure 42 for the message indicator timing diagram). Table 16. Indicator Register Bit 7 (R2) Bit 6 (R1) Bit 5 (P3) Bit 4 (P2) Bit 3 (P1) Bit 2 (I3) Bit 1 (I2) Bit 0 (I1) (tRAMP) 00 = 78 ms (default) 01 = 156 ms 10 = 312 ms 11 = 624 ms (PERIOD#) 000 = 0 (default) 001 = 1 010 = 2 011 = 3 100 = 4 101 = 5 110 = 6 111 = 7 (IIND) 000 = 2.25 mA (default) 001 = 4.5 mA 010 = 6.75 mA 011 = 9 mA 100 = 11.25 mA 101 = 13.5 mA 110 = 15.75 mA 111 = 18 mA 8.6.16 Indicator Blinking Register The Indicator Blinking Register contain the bits which control the following: 1. Number of periods (tPERIOD = tRAMP × 2 + tPULSE × 2) 2. Active Time (tACTIVE = tPERIOD × PERIOD# ) 3. Blank Time (tBLANK = tACTIVE × BLANK#) – (see Figure 42) |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |