AD10200SLASHPCB datasheet(3/20 Pages) AD

3 / 20 page

REV. A

–3–

AD10200

Test

MIL

Parameter

Temp

Level

Subgroup

Min

Typ

Max

Unit

DYNAMIC PERFORMANCE

(Continued)

Signal-to-Noise Ratio (SINAD)

(With Harmonics)

fIN = 10 MHz

°C

dBFS

Full

dBFS

fIN = 41 MHz

°C

65.5

dBFS

Full

5, 6

60.5

dBFS

fIN = 71 MHz

°C

63.5

dBFS

Full

5, 6

dBFS

fIN = 121 MHz

°C

58.5

dBFS

Full

5, 6

dBFS

Spurious Free Dynamic Range

fIN = 10 MHz

°C

dBFS

Full

dBFS

fIN = 41 MHz

°C

dBFS

Full

5, 6

67.5

dBFS

fIN = 71 MHz

°C

dBFS

Full

5, 6

dBFS

fIN = 121 MHz

°C

dBFS

Full

5, 6

55.5

dBFS

Two-Tone Intermodulation

Distortion

10 (IMD)

fIN = 10 MHz; fIN = 12 MHz

°C

dBc

Full

dBc

fIN = 71 MHz; fIN = 72 MHz

°C

dBc

Full

dBc

fIN = 121 MHz; fIN = 122 MHz

°C

55.5

dBc

Full

5, 6

dBc

Channel-to-Channel Isolation

fIN = 121 MHz

Full

NOTES

1All ac specifications tested by driving ENCODE and

ENCODE differentially.

2Gain Error measured at 2.5 MHz.

3Input VSWR guaranteed 10 MHz to 200 MHz.

V and tPD are measured from the transition points of the ENCODE input to the 50%/50% levels of the digital outputs swing. The digital output load during test is

not to exceed an ac load of 10 pF or a dc current of

± 40 mA.

5Supply voltages should remain stable within

± 5% for normal operation.

6Power dissipation measured with encode at rated speed and 0 dBm analog input.

7Analog Input signal power at –1 dBFS; signal-to-noise ratio (SNR) is the ratio of signal level to total noise (first 5 harmonic removed). Encode = 105 MSPS. SNR

is reported in dBFS, related back to converter full scale.

8Analog Input signal power at –1 dBFS; signal-to-noise and distortion (SINAD) is the ratio of signal level to total noise + harmonics. Encode = 105 MSPS. SINAD

is reported in dBFS, related back to converter full scale.

9Analog Input signal equal –1 dBFS; SFDR is ratio of converter full scale to worst spur.

10Both input tones at –7 dBFS; two tone intermodulation distortion (IMD) rejection is the ratio of either tone to the worst third order intermod product. f1 = x MHz

± 100 kHz, f2 = x MHz ± 100 kHz.

11Channel-to-Channel isolation tested with A Channel/50

Ω terminated (A

INA2) grounded and a full-scale signal applied to B Channel (A INB2).

Specifications subject to change without notice.

AD10200/PCB датащи(PDF) 3 Page - Analog Devices

AD10200/PCB датащи(HTML) 3 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

датащи скачать

ссылки URL