bq78350-R1

SLUSCD0 – AUGUST 2015

www.ti.com

In addition to many other options, the number of LEDs used and the percentage at which they can be illuminated

are configurable.

10.2.3.5.2

SMBus Address

Although the SMBus slave address is a configurable value in the bq78350-R1, this feature is disabled by default

and the slave address is 0x16. The SMBus Address feature can allow up to nine different addresses based on

external resistor value variation per address.

The default setup of the bq78350-R1 is generic, but there are many additional features that can be enabled and

configured to support a variety of system requirements. These are detailed in the bq78350-R1 Technical

Reference Manual (SLUUBD3).

10.2.4 Application Performance Plots

When the bq78350-R1 is powered up, there are several signals that are enabled at the same time. Figure 9

shows the rise time of each of the applicable signals.

Figure 9. VCC, MRST, VEN, and PWRM upon Power Up

20

Submit Documentation Feedback

Copyright © 2015, Texas Instruments Incorporated

Product Folder Links: bq78350-R1