150W Triple Output with PFC Function

WWW.ASTRODYNETDI.COM

ASTRODYNE USA: 1-800-823-8082

ASTRODYNE PACIFIC: 886-2-26983458

INPUT SPECIFICATIONS

Input Voltage Range (Note 3)

90-264VAC / 127-370 Volts(DC)

Frequency Range

47-63 Hz

Inrush Current, typ: (cold start)

≤ 40Amps @ 230VAC

Input Current

2.5 Amps max @ 115VAC

1.2 Amps max @ 230VAC

Leakage current

< 3.5mA / 240 VAC

Power Factor @ FL

PF > 0.94/230VAC

>0.98/115VAC

OUTPUT SPECIFICATIONS

Voltage and Current

See Selection Chart

Line Regulation

±1.0%

Load Regulation

See Selection Chart

Voltage Tolerance (Note 2)

See Selection Chart

Ripple/Noise (Note 1)

See Selection Chart

Hold Up Time @ FL

24mS/230VAC, 24mS/115VAC

Setup, Rise Time @ FL

800mS, 60mS/230VAC

800mS, 60mS/115VAC

Over Voltage Protection

5Volts(DC) only: 5.75~6.75Volts(DC)

Shutdown o/p voltage, auto recover

Over Current Protection

105~150% rated ourtput power

Hiccup mode, auto recover

Over Temperature Protecion

95°C ±5°C (TSW1)

Shutdown o/p voltage, auto recover

DC Voltage Adjust

5Volts(DC): 4.5~5.5Volts(DC)

GENERAL SPECIFICATIONS

Safety

UL60950-1

TUV EN60950-1 approved

Insulation Resistance

≥ 100MΩ / 500Volts(DC)

EMI

Compliance to EN55022 (CISPR22)

Class B

Harmonic Current

Compliance to EN61000-3-2,-3

Efficiency

77% typ.

Isolation

3000VAC Input - Output

1500VAC Input - Ground

500VAC Output - Ground 1min

EMS

Compliance to

EN61000-4-2,3,4,5,6,8,11;

ENV50204, EN55024

light industry level, criteria A

ENVIRONMENTAL SPECIFICATIONS

Oper. Temperature

-10°C to +60°C (See Derate Curve)

Storage Temperature

-20°C to +85°C, 10~95% RH

Relative Humidity

20 to +90% RH non cond

Temperature Coefficient

±0.03% / °C (0-50°C)

MTBF

161.6KHrs min, MIL-HDBK-217F (25°C)

Vibration

10~500Hz, 2G10min./1cycle, period for

60min. each along X, Y, Z axes

PHYSICAL SPECIFICATIONS

Size

Millimeters

199 x 99 x 50

Inches

7.84” x 3.90” x 1.97”

Weight

31.75 oz (900g)

NOTE

1. Ripple and Noise are measured at 20MHz of bandwidth by using a

12” twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor.

2. Tolerance: includes set up tolerance, line regulation and load regula-

tion.

3. Derating may be needed under low input voltages. Please check the

derating curve for more details.

All specifications are typical at nominal input, full load, and 25°C unless other-

wise noted