R07DS1114EJ0200 Rev.2.00

Page 1 of 39

May 22, 2015

Datasheet

µ

PD166037T1J

INTELLIGENT POWER DEVICE

1. Overview

1.1 Description

Family:

µ

PD166037T1J is a part of 2nd Generation Intelligent Power Devices (IPD). This is N-channel high-side switch with

charge pump, voltage controlled input, diagnostic feedback with proportional load current sense and embedded

protection function. Family includes up to 14 devices depending on on-state resistance, package and channel number

combination.

Scalability:

Variety of on-state resistance combined with standardized package on pin-out give user high flexibility for unit design

depending on target load.

Robustness:

Because of advanced protection method, 2nd Generation Intelligent Power Devices achieve high robustness against

long term and repetitive short circuit condition.

1.2 Features

- Built-in charge pump

- 3.3V compatible logic interface

- Low standby current

- Short circuit protection

- Shutdown by over current detection

- Power limitation protection by over load detection (Power limitation: current limitation with delta Tch control)

- Absolute Tch over temperature protection

- Built-in diagnostic function

- Proportional load current sensing

- Defined fault signal in case of abnormal load condition

- Loss of ground protection

- Under voltage lock out

- Active clamp operation at inductive load switch off

- AEC Qualified

- RoHS compliant

1.3 Application

- Light bulb switching from 21W to 32W

- Switching of all types of 14V DC grounded loads, such as LED, inductor, resistor and capacitor

- Power supply switch, fail-safe switch of 14V DC grounded system

Note: The information contained in this document is the one that was obtained when the document was issued,

and may be subject to change.

R07DS1114EJ0200

Rev.2.00

May 22, 2015