| поискавой системы для электроныых деталей |
|
AT45CS1282 датащи(PDF) 14 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
AT45CS1282 датащи(HTML) 14 Page - ATMEL Corporation |
|
14 / 33 page ![]() 14 AT45CS1282 [Preliminary] 3447A–DFLSH–2/04 Note: 1. After power is applied and VCC is at the minimum specified datasheet value, the system should wait 20 ms before an opera- tional mode is started. Notes: 1. I CC1 during a buffer read is 25 mA maximum. 2. I CC2 during a buffer read is 25 mA maximum. Absolute Maximum Ratings* Temperature under Bias ............................... -55 ° C to +125° C *NOTICE: Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent dam- age to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Storage Temperature .................................... -65 ° C to +150° C All Input Voltages (including NC Pins) with Respect to Ground ...................................-0.6V to +6.25V All Output Voltages with Respect to Ground .............................-0.6V to VCC + 0.6V DC and AC Operating Range AT45CS1282 Operating Temperature (Case) Com. 0 ° C to 70° C V CC Power Supply (1) 2.7V to 3.6V DC Characteristics Symbol Parameter Condition Min Typ Max Units I SB Standby Current CS, RESET, WP = V IH, all inputs at CMOS levels 15 50 µA I CC1 (1) Active Current, Read Operation, Serial Interface f = 20 MHz; I OUT = 0 mA; V CC = 3.6V 10 20 mA ICC2 (2) Active Current, Read Operation, 8-bit Interface f = 10 MHz; IOUT = 0 mA; V CC = 3.6V 12 20 mA I CC3 Active Current, Program Operation, Page Program V CC = 3.6V 50 mA I CC4 Active Current, Program Operation, Fast Page Program V CC = 3.6V 65 mA ICC5 Active Current, Sector Erase Operation VCC = 3.6V 50 mA I LI Input Load Current V IN = CMOS levels 1 µA ILO Output Leakage Current VI/O = CMOS levels 1 µA V IL Input Low Voltage V CC x 0.3 V V IH Input High Voltage V CC x 0.7 V VOL Output Low Voltage IOL = 1.6 mA; VCC = 2.7V 0.4 V V OH Output High Voltage I OH = -100 µA V CC - 0.2V V |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |