45738 Northport Loop West, Fremont, CA 94538

Phone: (510) 979-8999

Fax: (510) 979-8902

www.eiccorp.com

2

ECP200

2.0 WATT POWER AMPLIFIER

Revision A

SS-000536-000

PRELIMINARY DATA SHEET

Package

DEVICE MARKING

Pin Definitions

Note: Exceeding any of the absolute maximum ratings may cause permanent damage to the device.

Note: Do not exceed more than one parameter at the same time.

RATING

UNIT

8Volts

1400

mA

+28

dBm

-65 to +150

°C

Ambient Operating Temperature

-40 to +85

°C

Absolute Maximum DC Power

4

Watts

Storage Temperature

PARAMETER

RF Power Input

Supply Voltage

Supply Current

PIN

FUNCTION

DEFINITION

1

Vref/pd

This pin sets the reference / quiescient current.

2,4-5, 9,

12-15

GND

These pins provide ground as well as the slug which is required for heat sinking.

3RF in

This pin connects to the input of the amplifier. It will have a dc voltage around

1.25 to 1.3 VDC. External circuit should provide DC blocking.

10,11

RF out

These are the output pins, which connects to the collector of the transistor. On

the PCB, the two pins should also be tied together. Vcc connects to these

through an inductor. A DC blocking capacitor is required.

16

Vbias

This pin provides current to the bias circuit , typically Vbias = Vcc. Bypass

capacitors should be placed as close as practically possible to this pin.

Absolute Maximum Ratings

QFN-16 (4x4mm) Package Outline