www.micropowerdirect.com

Model

Number

Input

Output

Maximum

Output

Power

(W)

Output

Voltage

Accuracy

(%)

Capacitive

Load

(µF, Max)

Efficiency

(%, Typ)

Fuse Rating

Slow-Blow

Voltage

(VDC)

Current

(mA Max.)

MPL-01S-05EUP

0.120

0.060

5.0

200

1.0

±8.0

220

66

1.0A/250 VAC

MPL-01S-09EUP

0.120

0.060

9.0

111

1.0

±5.0

100

67

1.0A/250 VAC

MPL-01S-12EUP

0.120

0.060

12.0

83

1.0

±5.0

100

70

1.0A/250 VAC

MPL-01S-15EUP

0.120

0.060

15.0

67

1.0

±5.0

100

69

1.0A/250 VAC

MPL-01S-24EUP

0.120

0.060

24.0

42

1.0

±5.0

100

68

1.0A/250 VAC

Notes:

1. Operation at no load will not damage the units, however, they may not meet all specifications.

3. All units will meet EN 55022 (CE/RE) class A with the input circuit shown in the “Typical Connection 1” diagram on page 3. The MPL01SEUP will meet class B with the additional filtering shown in the

“Typical Connection 2” diagram on page 3. MPD offers filter modules that will save on board space and make the input filter design easier. Contact the factory for more information.

4. To meet the requirements of EN 61000-4-3, (10V/m) external filtering (as shown in the “Typical Connection 2” diagram on page 3) is required. This filtering may be added discretely, or by using a

filter module from MPD. Contact the factory for more information.

5. All units will meet EN 61000-4-4 (±2 kV) with the input circuit shown in the “Typical Connection 1” diagram on page 3. To meet the requirements of EN 61000-4-4 (±4 kV), external components

(as shown in the “Typical Connection 2” diagram on page 3) are required. This filtering may be added discretely, or by using a filter module from MPD. Contact the factory for more information.

6. All units will meet the requirements of EN 61000-4-5 (±1 kV/±2 kV), with the input circuit shown in the “Typical Connection 1,2” diagrams on page 3. This filtering may be added discretely, or by

using a filter module from MPD. Contact the factory for more information.

7. All units will meet the requirements of EN 61000-4-6 (10V rms), with the input circuit shown in the “Typical Connection 2” diagram on page 3. This filtering may be added discretely, or by using a

filter module from MPD. Contact the factory for more information.

8. It is recommended that a fuse be used on the input of a power supply for protection. For the MPL-01SEUP series, a 1.0A/250 VAC slow blow should be used.

Model Selection Guide