Data Sheet

ADuM3154

ABSOLUTE MAXIMUM RATINGS

Table 15.

Parameter

Rating

−65°C to +150°C

Ambient Operating Temperature

−40°C to +125°C

−0.5 V to +7.0 V

Input Voltages (MCLK, MSS, MO, SO,

SSA0, SSA1)

Output Voltages (SCLK, MI, SI, SS0

SS1, SS2, SS3)

−10 mA to +10 mA

−100 kV/µs to +100 kV/µs

1

See Figure 2 for maximum safety rated current values across temperature.

2

Refers to common-mode transients across the insulation barrier. Common-

mode transients exceeding the absolute maximum ratings may cause

latch-up or permanent damage.

Stresses at or above those listed under Absolute Maximum

Ratings may cause permanent damage to the product. This is a

stress rating only; functional operation of the product at these

or any other conditions above those indicated in the operational

section of this specification is not implied. Operation beyond

the maximum operating conditions for extended periods may

affect product reliability.

Parameter

Max

Unit

Constraint

AC 60 Hz

RMS Voltage

400

V rms

20-year lifetime at 0.1%

failure rate, zero average

voltage

DC Voltage

722

V peak

Limited by the creepage of

the package, Pollution

1

See the Insulation Lifetime section for details.

2

Other pollution degree and material group requirements yield a different limit.

3

Some system level standards allow components to use the printed wiring

board (PWB) creepage values. The supported dc voltage may be higher for

those standards.

ESD CAUTION

Rev. A | Page 13 of 22