MICROWAVE CORPORATION

11 - 61

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order Online at www.hittite.com

11

Absolute Maximum Ratings

Pin Locations & Outline Drawing

RF Input (Vcc= +5V)

+20 dBm

Vcc

+6.0V

Storage Temperature

-65 to +150 °C

Operating Temperature

-40 to +85 °C

Typical Supply Current vs. Vcc

Vcc (V)

Icc (mA)

4.5

66

5.0

68

5.5

70

Note: Multiplier will operate over full voltage range

shown above.

HMC444LP4

v01.0604

SMT GaAs HBT MMIC x8 ACTIVE

FREQUENCY MULTIPLIER, 9.9 - 11.2 GHz OUTPUT

NOTES:

1. MATERIAL PACKAGE BODY: LOW STRESS INJECTION MOLDED

PLASTIC SILICA AND SILICON IMPREGNATED.

2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY

3. LEAD AND GROUND PADDLE PLATING: Sn/Pb SOLDER

4. DIMENSIONS ARE IN INCHES [MILLIMETERS].

5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE

6. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.

PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.

7. PACKAGE WARP SHALL NOT EXCEED 0.05mm.

8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED

TO PCB RF GROUND.

9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB

LAND PATTERN.