MICROWAVE CORPORATION

8 - 123

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order Online at www.hittite.com

8

HMC356LP3

v01.0604

GaAs PHEMT MMIC LOW NOISE

AMPLIFIER, 350 - 550 MHz

Item

Description

J1 - J2

PC Mount SMA RF Connector

J3 - J4

DC Pin

C1

10,000 pF Capacitor, 0402 Pkg.

C2

10,000 pF Capacitor, 0603 Pkg.

L1

51 nH Inductor, 0402 Pkg.

L2

36 nH Inductor, 0603 Pkg.

U1

HMC356LP3 Amplifier

PCB*

106722 Eval Board

* Circuit Board Material: Rogers 4350

Evaluation PCB

The circuit board used in the final application should

use RF circuit design techniques. Signal lines should

have 50 ohm impedance while the package ground

leads and exposed paddle should be connected directly

to the ground plane similar to that shown. A sufficient

number of VIA holes should be used to connect the top

and bottom ground planes. The evaluation circuit board

shown is available from Hittite upon request.

List of Material