M02011

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

http://www.macom.com/support

16

CMOS Transimpedance Amplifier with AGC

for Fiber Optic Networks up to 622 Mbps

Rev V5

4.5

Treatment of PINK

PINK requires bypassing to ground with a capacitor when powering a photo diode. If PINK is not used to bias the

photo diode, then it is not necessary to bypass an unused PINK.

Figure 4-3.

Typical Layout Diagram with Photodiode Mounted on TOCAN base (5 pin TOCAN)

NOTE:

Typical application inside of a five lead TO-Can.

epoxy or a similar die attach material. If a monitor output is not required then a four lead TO-Can may be used.

MON

DOUT

DOUTB

1nF

470pF