Monolithic MMIC Amplifier

Notes

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.

B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.

C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled

to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp

Page 4 of 4

No. Test Required

Condition

Standard

Quantity

1

Visual Inspection

Low Power Microscope

Magnification 40x

MIP-IN-0003

(MCT spec)

45 units

2

Electrical Test

Room Temperature

SCD

(MCL spec)

45 units

3

SAM Analysis

Less than 10% growth in term of

delamination

J-Std-020C

(Jedec Standard)

45 units

4

Moisture Sensitivity

Level 1

Bake at 125°C for 24 hours

Soak at 85°C/85%RH for 168 hours

Reflow 3 cycles at 260°C peak

J-Std-020C

(Jedec Standard)

45 units

Visual

Inspection

Electrical Test

SAM Analysis

Reflow 3 cycles,

260°C

Soak

85°C/85RH

168 hours

Bake at 125°C,

24 hours

Visual

Inspection

Electrical Test

SAM Analysis

Start

MSL Test Flow Chart

Human Body Model (HBM): Class 1B (500 v to < 1000 v) in accordance with ANSI/ESD STM 5.1 - 2001

Machine Model (MM): Class M1 ( < 100 v) in accordance with ANSI/ESD STM 5.2 - 1999

MSL Rating

Moisture Sensitivity: MSL1 in accordance with IPC/JEDECJ-STD-020C

ESD Rating

VAM-3+