BTS 441 R

Infineon Technologies AG

12

2003-Oct-01

Package and Ordering Code

All dimensions in mm

SMD: P-TO263-5-2

(tape&reel)

Sales code

BTS441R G

Ordering code:

Q67060-S6118

Straight: P-TO220-5-12

Sales code

BTS441R S

Ordering code:

Q67060-S6119

Published by

Infineon Technologies AG,

St.-Martin-Strasse 53,

D-81669 München

© Infineon Technologies AG 2001

All Rights Reserved.

Attention please!

The information herein is given to describe certain

components and shall not be considered as a guarantee of

characteristics.

Terms of delivery and rights to technical change reserved.

We hereby disclaim any and all warranties, including but not

limited to warranties of non-infringement, regarding circuits,

descriptions and charts stated herein.

Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and

conditions and prices please contact your nearest Infineon

Technologies Office in Germany or our Infineon

Technologies Representatives worldwide (see address list).

Warnings

Due to technical requirements components may contain

dangerous substances. For information on the types in

question please contact your nearest Infineon Technologies

Office.

Infineon Technologies Components may only be used in life-

support devices or systems with the express written approval

of Infineon Technologies, if a failure of such components can

reasonably be expected to cause the failure of that life-

support device or system, or to affect the safety or

effectiveness of that device or system. Life support devices

or systems are intended to be implanted in the human body,

or to support and/or maintain and sustain and/or protect

human life. If they fail, it is reasonable to assume that the

health of the user or other persons may be endangered.

A

8˚ max.

B

A

0.1

Typical

±0.2

10

0...0.15

±0.1

1.27

4.4

B

0.05

1)

0.1

All metal surfaces tin plated, except area of cut.

2.4

4x1.7

A

B

A

Typical

0...0.15

1.7

±0.1

1.27

4.4

B

0.05

1)

All metal surfaces tin plated, except area of cut.

C

8.5

1)

C

2.4

6x