SPC560D30L3 datasheet(69/90 Pages) STMICROELECTRONICS

69 / 90 page

SPC560D30x, SPC56040Dx

Electrical characteristics

Doc ID 16315 Rev 7

69/90

4.18

On-chip peripherals

4.18.1

Current consumption

TUEX(7) CC

T Total unadjusted error

for extended channel

Without current injection

–10

LSB

With current injection

–12

VDD = 3.3 V ± 10% / 5.0 V ± 10%, TA = 40 to 125 °C, unless otherwise specified.

Analog and digital VSS must be common (to be tied together externally).

VAINx may exceed VSS_ADC and VDD_ADC limits, remaining on absolute maximum ratings, but the results of the conversion

will be clamped respectively to 0x000 or 0xFFF.

Duty cycle is ensured by using system clock without prescaling. When ADCLKSEL = 0, the duty cycle is ensured by internal

divider by 2.

During the sampling time the input capacitance CS can be charged/discharged by the external source. The internal

resistance of the analog source must allow the capacitance to reach its final voltage level within tS. After the end of the

sampling time tS, changes of the analog input voltage have no effect on the conversion result. Values for the sample clock

tS depend on programming.

This parameter does not include the sampling time tS, but only the time for determining the digital result and the time to load

the result’s register with the conversion result.

Total Unadjusted Error: The maximum error that occurs without adjusting Offset and Gain errors. This error is a

combination of Offset, Gain and Integral Linearity errors.

Table 42.

ADC conversion characteristics (continued)

Symbol

Parameter

Conditions(1)

Value

Unit

Min

Typ

Max

Table 43.

On-chip peripherals current consumption(1)

Symbol

Parameter

Conditions

Typical value(2) Unit

IDD_BV(CAN)

CC T

CAN (FlexCAN) supply

current on VDD_BV

500 Kbyte/s Total (static + dynamic)

consumption:

– FlexCAN in loop-back

mode

– XTAL at 8 MHz used as

CAN engine clock source

– Message sending period

is 580 µs

8×fperiph + 85

µA

125 Kbyte/s

8 × fperiph + 27

µA

IDD_BV(eMIOS)

CC T

eMIOS supply current

on VDD_BV

Static consumption:

– eMIOS channel OFF

– Global prescaler enabled

29 × fperiph

µA

Dynamic consumption:

– It does not change varying the

frequency (0.003 mA)

3µA

IDD_BV(SCI)

CC T

SCI (LINFlex) supply

current on VDD_BV

Total (static + dynamic) consumption:

–LIN mode

– Baudrate: 20 Kbyte/s

5×fperiph + 31

µA

SPC560D30L3 датащи(PDF) 69 Page - STMicroelectronics

SPC560D30L3 датащи(HTML) 69 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90

датащи скачать

ссылки URL