| поискавой системы для электроныых деталей |
|
CAP1126 датащи(PDF) 34 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
CAP1126 датащи(HTML) 34 Page - Microchip Technology |
|
34 / 73 page ![]() CAP1126 DS00001623B-page 34 2015 Microchip Technology Inc. The Sensitivity Control register controls the sensitivity of a touch detection. Bits 6-4 DELTA_SENSE[2:0] - Controls the sensitivity of a touch detection. The sensitivity settings act to scale the rel- ative delta count value higher or lower based on the system parameters. A setting of 000b is the most sensitive while a setting of 111b is the least sensitive. At the more sensitive settings, touches are detected for a smaller delta capacitance corresponding to a “lighter” touch. These settings are more sensitive to noise, however, and a noisy environment may flag more false touches with higher sensitivity levels. APPLICATION NOTE: A value of 128x is the most sensitive setting available. At the most sensitivity settings, the MSB of the Delta Count register represents 64 out of ~25,000 which corresponds to a touch of approximately 0.25% of the base capacitance (or a ΔC of 25fF from a 10pF base capacitance). Conversely, a value of 1x is the least sensitive setting available. At these settings, the MSB of the Delta Count register corresponds to a delta count of 8192 counts out of ~25,000 which corresponds to a touch of approximately 33% of the base capacitance (or a ΔC of 3.33pF from a 10pF base capacitance). Bits 3 - 0 - BASE_SHIFT[3:0] - Controls the scaling and data presentation of the Base Count registers. The higher the value of these bits, the larger the range and the lower the resolution of the data presented. The scale factor represents the multiplier to the bit-weighting presented in these register descriptions. APPLICATION NOTE: The BASE_SHIFT[3:0] bits normally do not need to be updated. These settings will not affect touch detection or sensitivity. These bits are sometimes helpful in analyzing the Cap Sensing board performance and stability. TABLE 6-8: DELTA_SENSE BIT DECODE DELTA_SENSE[2:0] Sensitivity Multiplier 210 0 0 0 128x (most sensitive) 001 64x 0 1 0 32x (default) 011 16x 100 8x 101 4x 110 2x 1 1 1 1x - (least sensitive) TABLE 6-9: BASE_SHIFT BIT DECODE BASE_SHIFT[3:0] Data Scaling Factor 32 1 0 00 0 0 1x 00 0 1 2x 00 1 0 4x 00 1 1 8x 01 0 0 16x 01 0 1 32x 01 1 0 64x 0 1 1 1 128x 1 0 0 0 256x All others 256x (default = 1111b) |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |